Detailed comparison of the Canon T8i with the Canon Sl3.

Images will seem sharper if no low-pass filter is used, however there is a possibility of moiré appearing in some settings if no low-pass filter is used. Continue reading the following sections to have a better understanding of how the Canon T8i and Canon SL3 compare, and perhaps you will have enough information to make an informed decision about which one is best for you.

Reviews by Subject Matter Experts

It is possible to compute equivalent aperture by multiplying the lens aperture by the crop factor (a.k.a. focal length multiplier). Cameras for “connected living” should be small and lightweight, not too large, and equipped with a touch screen as well as built-in WiFi and Bluetooth, among other features. Excellent focusing and high-ISO performance, as well as a fast continuous shooting speed and a large buffer capacity, are required for a decent sports and action camera to be effective. A decent landscape camera should have a high resolution and a broad dynamic range; it should also be weather-sealed to be effective in all weather conditions. Take care of those 8K RED files like a pro. The SL3 was unveiled ten months before the T8i, and the two vehicles are from the same generation as each other.

Cultivator Rebel T8i Crop Factor

As a side point, it should be mentioned that certain review sites have changed their methods of delivering their assessments throughout the years. In April 2019, the Canon EOS Rebel SL3 was officially announced, and in February 2020, the Canon EOS Rebel T8i was officially presented. Larger pixels have the ability to gather more photons, resulting in a broader dynamic range, but smaller pixels enable better resolutions for a given sensor area, resulting in a more compact sensor. There are many new camera models available that are not only capable of shooting still photographs, but are also capable of recording video footage. In addition to being equipped with sensors that have a suitable read-out speed for moving pictures, both the SL3 and T8i have frames per second that are greater than the T8i.

The magnifications of the viewfinders of both cameras are shown in this infographic. Compared to normal size, the black area indicates a magnification of 1x; the red region represents a magnification of 0.85x, which is the greatest value available in any camera on the market at the time of writing. In terms of magnification, the viewfinder has a magnification of 0.52x and covers 95 percent of the field of vision.

An in-body AF motor allows you to auto-focus with older lenses that do not have their own motors, which is quite convenient. The DXOMARK Sensor Overall Score indicates the overall quality of a camera’s sensor in terms of noise, the capacity to produce high contrast, the development of colored noise, and the ability to shoot in low light conditions. The competition should be tight considering both models are listed among the best in their respective categories for entry-level DSLR cameras.

They mix high picture quality with low cost and a minimal set of functionality to create a compelling package. In order to capture images in available light, cameras must be capable of maintaining excellent picture quality even while shooting at high ISO settings and must have an effective focusing system in low light. It is the width to height ratio of the photographs that were taken “straight out of the camera.”

Do the Canon SL3 and Canon T8i’s technical features position them among the top-tier cameras in their respective classes? Find out whether the two cameras are among the best in the business in the most recent Best DSLR Camera ranking, which is updated weekly. The maximum number of shots that can be taken in high-speed continuous drive mode before the buffer is completely depleted. The LCD panels of the Canon T8i and Canon SL3 are the same size, measuring 3.00 inches diagonally.

Out of 81 cameras in this class, the Canon T8i is rated third overall with a score of 73, and the Canon SL3 is ranked fourth overall with a score of 73, respectively. See the part lower down this page for a more in-depth analysis of size options. The pixel density of a sensor indicates how many million pixels can or would fit in a square centimeter of the sensor. The amount of light that can be collected by a pixel or photosite depends on the size of the pixel or photosite. Pixel pitch is a measurement of the distance between the centers of one pixel and the centers of the next.

The following side-by-side comparison compares the physical dimensions and weight of the Canon SL3 and Canon T8i cameras. Three sequential views are displayed, one from the front, one from the top, and one from the rear side. All width, height, Canon EOS Rebel T8i vs Canon EOS Rebel SL3 and depth measurements are given to the nearest millimeter unless otherwise stated.

Under these conditions (23°C and ISO 100), the AF working range’s minimum exposure value is 1. The lower this number is, the less light is required for regular autofocus functioning to take place. Before we get into our more in-depth comparison of the Canon T8i and Canon SL3, let’s take a quick look at the primary characteristics of both cameras. Remember that the weight of an Interchangeable Lens Camera will vary based on which lens is currently connected to the camera at the time of shooting. The following is a comparison of the front view measurements of the SL3 and the T8i cameras. The APS-C sensor used in both cameras has a total area of about 332mm2 and is incorporated inside both cameras (13.1 sq.in.).